山东晟亚石材有限公司山东锈石厂欢迎您的光临!
全国咨询电话
18946249118 15214444313

联系我们 CONTACT US
山东晟亚石材有限公司
联系人:刘经理

电话:18946249118 / 15214444313


地址:济宁市汶上县白石镇鑫亚石材厂
常见问题
当前位置:首页> 新闻中心>常见问题>黄锈石的吸水率介绍!
黄锈石的吸水率介绍!
来源:http://www.shengyashicai.com 日期:2019-04-17 发布人:admin
 浏览量:
  黄锈石吸水率及测试方法,黄锈石现在作为家装中的新宠一直受到广大人们的热爱,现在我们很多家中使用的装修材料正是黄锈石,所以我们要保护好我们所使用的石材,接下来我们了解一下黄锈石的吸水率
  Yellow rust stone water absorption and testing methods, yellow rust stone as a new favorite in home decoration has been loved by the majority of people, now many of our home decoration materials are yellow rust stone, so we need to protect the stone we use, and then we understand the water absorption rate of yellow rust stone.
  岩石的吸水率可用水量与绝对干燥岩石重量之比来表示。作为建筑材料、电气绝缘材枓及使用寒冷地区时,均需测试,且要求吸水率应小于0.25%。
  The water absorption of rock can be expressed by the ratio of water content to absolute dry rock weight. When used as building materials, electrical insulating materials and in cold areas, the water absorption should be less than 0.25%.
  试件为100x100x100mm立方体,每次三个。石材的层理应于试件的两个面平行。测试时将试件直立地(石材层理与底平行)浸入盛有15-25℃纯洁蒸馏水的水槽中,试件的底面用玻璃管(或其它不吸水的垫块)垫起,不与槽底接触,试件顶面应始终保持高出水面约7-8mm,待试件浸水48小时后取出,用稍带潮湿而能吸水的毛巾将试件六个表面的水分拭称去,试件重量G1。再将试件放在105-110℃烘箱中24小时,干冷却至室温后,称其重量G2。按下式计算即计算吸水率取2位有效数。以三个试件吸水率的算术平值作为试验结果。并在报告中列出大值与小值
山东锈石厂
  The specimens are 100x100x100mm cubes, three at a time. The layers of stone should be parallel to the two sides of the specimen. When testing, the specimen is immersed vertically (stone bedding is parallel to the bottom) in a tank filled with pure distilled water at 15-25 C. The bottom of the specimen is padded with glass tubes (or other non-absorbent pads) without contact with the bottom of the tank. The top surface of the specimen should always be kept about 7-8 mm above the water level. After 48 hours of immersion, the specimen is taken out and the water on the six surfaces of the specimen is wiped with a towel that is slightly moist and absorbs water. Weighing, specimen weight G1. The specimens were then placed in an oven at 105-110 C for 24 hours, then dried and cooled to room temperature, and weighed G2. According to the formula, the water absorption rate is calculated to take two effective digits. The arithmetic mean values of water absorption of three specimens were used as test results. The maximum and minimum values are listed in the report.
  以上为黄锈石的吸水率以及测试吸水率的方法,我们现在很多人的家中都在装着黄锈石材料的装饰品,所以大家可以按照以上的方法测试黄锈石的吸水率,如果大家想要了解更多关于黄锈石的信息,可以咨询我们山东锈石厂的工作人员或者关注我们的网站:www.shengyashicai.com
  Above is the water absorption rate of yellow rust stone and the method of testing water absorption rate. Now many people's homes are filled with ornaments made of yellow rust stone material. So you can test the water absorption rate of yellow rust stone according to the above method. If you want to know more about yellow rust stone, you can consult our staff of Shandong Rust Stone Factory or pay attention to our website: www.shengy. Ashicai.com
相关推荐