山东晟亚石材有限公司山东锈石厂欢迎您的光临!
全国咨询电话
18946249118 15214444313

联系我们 CONTACT US
山东晟亚石材有限公司
联系人:刘经理

电话:18946249118 / 15214444313


地址:济宁市汶上县白石镇鑫亚石材厂
新闻资讯
当前位置:首页> 新闻中心>新闻资讯>山东锈石翻新有什么方法?
山东锈石翻新有什么方法?
来源:http://www.shengyashicai.com 日期:2019-06-27 发布人:admin
 浏览量:
  山东黄锈石的装修有什么方法,现在锈石被广泛使用,其实很多装修,使用的非常广泛,但是长时间使用会有一定的磨损现象。面对这种现象,我们需要找到时间装饰措施,黄锈石制造商告诉我们,白锈石的技能翻新使用物理研磨方法必须满足两个条件:一是翻新机的重量,另一种是翻新机的速度。也就是说,在白锈石材的磨削过程中,要求在低重量和低速抛光的过程中,采用低重量和高速。目前市场上使用的普通重型机械重量轻、速度慢,不能满足花岗岩表面提升和物理磨削的必要条件。因此,白色锈石装饰后的效果并不理想。因此,我们建议使用ASL洁美T2石材翻新机对花岗岩进行翻新。其翻新机器重量是0 ~ 165公斤,转速为900 RPM,变频可调,操作方便,满足花岗岩的要求条件转换,花岗岩翻新后的亮度70 ~ 80度或以上几乎是接近于原始石头亮度。白锈石的改造有什么办法,现在山东锈石坚硬,所以表面只损坏化学固化剂、抛光剂。在维护中很难达到理想的效果。大型石材翻新机的使用和物理磨削方法优于简单使用化工产品进行翻新和磨削。
  Shandong yellow rust stone decoration what method, now rust stone is widely used, in fact, many decoration, the use of a very wide range, but long-term use will have a certain wear phenomenon. Faced with this phenomenon, we need to find time decoration measures, yellow rust stone manufacturers tell us that white rust stone skills renovation using physical grinding methods must meet two conditions: one is the weight of the renovator, the other is the speed of the renovator. That is to say, in the grinding process of white rust stone, low weight and high speed polishing are required. At present, the common heavy machinery used in the market is light in weight and slow in speed, which can not meet the necessary conditions of surface lifting and physical grinding of granite. Therefore, the effect of white rust stone decoration is not ideal. Therefore, we suggest using ASL Jiemei T2 professional stone renovator to renovate granite. The weight of the retreading machine is 0 - 165 kg, the speed is 900 RPM, the frequency conversion is adjustable, the operation is convenient, and the requirements of granite are met. The brightness of the retreaded granite after 70 - 80 degrees or more is almost close to the original stone brightness. What's the way to transform white rust stone? Now Shandong rust stone is hard, so the surface only damages chemical curing agent and polishing agent. It is difficult to achieve ideal results in maintenance. The use and physical grinding method of large stone retreader is better than that of simple chemical products.
山东锈石厂家
  山东黄锈石如何改造
  How to Reform Shandong Yellow Rust Stone
  物理磨削方法必须满足两个条件:一是修整机的重量。二是改造机器的速度。也就是说,在石材磨削过程中需要重量和速度慢,在抛光过程中需要重量和速度低。由于市场上使用的普通称重机重量轻、转速低,不能满足花岗岩改造物理磨削的必要条件,因此白锈花岗岩改造效果不理想。因此,我们建议使用ASL洁美T2石材翻新机进行花岗岩翻新。其翻新机重量165KG,转速0~900转/分,变频可调,操作方便,能满足花岗岩翻新的要求,翻新花岗岩亮度70~80度以上,几乎接近原石材的亮度。
  Physical grinding method must satisfy two conditions: one is the weight of dressing machine. The second is the speed at which the machine is transformed. That is to say, in the process of stone grinding, weight and speed are needed, and in the process of polishing, weight and speed are low. Because the ordinary weighing machine used in the market is light in weight and low in speed, it can not meet the necessary conditions of physical grinding for granite transformation, so the effect of transformation of white rust granite is not ideal. Therefore, we suggest using ASL Jiemei T2 professional stone renovator for granite renovation. Its renovator weighs 165KG, rotates at 0-900 rpm, adjustable frequency conversion, easy operation, and can meet the requirements of granite renovation. The brightness of the renovated granite is over 70-80 degrees, almost close to the brightness of the original stone.
  事实上,改造是一种资源的再利用,这也是节约大量资源的好方法。我希望我们能更多的了解黄锈石的信息,以便更好的利用它。
  In fact, transformation is a kind of reuse of resources, which is also a good way to save a lot of resources. I hope we can learn more about the yellow rust stone in order to make better use of it.
相关推荐